Spray painting uses 10–20% more paint than brush and roller but saves 30–50% on labour time for large, open areas. For a full interior repaint, spray is often cheaper overall on new builds and empty houses. Brush and roller wins on occupied homes, detail work, and small jobs where masking time outweighs spray speed.
Prices last updated: April 2026
Understand whether spray or brush-and-roller gives you better value — and better results — for your specific project.
Compare production rates and margins for spray vs traditional methods. See where each approach makes the most financial sense.
Build quotes faster →| Factor | Spray Painting | Brush & Roller |
|---|---|---|
| Speed (walls) | 3–5× faster | Standard rate |
| Material usage | 10–20% more paint | Standard coverage |
| Masking time | High (2–4 hours per room) | Low (30 min per room) |
| Finish quality (walls) | Very even, no roller marks | Slight texture (orange peel) |
| Finish quality (trim) | Excellent on doors/cabinetry | Good, brush marks possible |
| Cutting in | Still needs brush at edges | Brush for edges, roller for walls |
| Best for new builds | Yes — empty rooms, fast coverage | Adequate but slower |
| Best for occupied homes | No — too much masking required | Yes — targeted application |
| Equipment cost | $2,000–$8,000 (airless sprayer) | $50–$150 (brushes, rollers) |
| Overspray risk | High — needs careful masking | None |
| Touch-ups | Hard to match spray finish | Easy to touch up with brush |
Spray painting delivers the best value in specific situations:
For overall painting rates, see our full NZ painting cost guide.
Traditional brush and roller application wins in many common NZ painting scenarios:
For room-by-room cost breakdowns, see our interior painting cost guide.
Whether you go spray, brush and roller, or a mix of both — get an accurate estimate for the full job. Use our calculator or let the AI quoting tool build a detailed quote.
Here's how the total cost compares on common NZ painting jobs:
| Method | Labour Days | Materials | Total |
|---|---|---|---|
| Spray | 3–4 days | $1,200–$1,800 | $4,000–$6,500 |
| Brush/roller | 5–7 days | $1,000–$1,500 | $5,500–$8,500 |
| Method | Labour Days | Materials | Total |
|---|---|---|---|
| Spray (with masking) | 5–7 days | $1,400–$2,000 | $5,500–$8,500 |
| Brush/roller | 5–7 days | $1,000–$1,500 | $5,500–$8,000 |
In an occupied home, the cost is nearly identical because masking time offsets spray speed. In an empty house, spray saves 15–25% overall.
For a tailored estimate, use our painting cost calculator.
It depends on the job. Spray painting saves 15–25% on empty houses and large exteriors where masking time is minimal. On occupied homes, the extensive masking needed makes spray and brush/roller roughly the same total cost.
Yes — spray application uses 10–20% more paint than brush and roller due to overspray and the atomisation process. On a full house interior, that's an extra $100–$300 in paint. The labour savings on suitable jobs more than offset this.
Spray produces a smoother, more even finish on large flat surfaces like walls, ceilings, and doors. Brush and roller leaves a slight texture (orange peel) that some homeowners actually prefer. For trim and cabinetry, spray gives a factory-quality result that's hard to match with a brush.
Whether you go spray, brush and roller, or a mix of both — get an accurate estimate for the full job. Use our calculator or let the AI quoting tool build a detailed quote.